Netgear WiFi Extender Not Working After Firmware Update?

Have you recently updated the firmware of your extender? Is your Netgear WiFi extender not working after firmware update? If yes, then we have got you covered.

Firmware updates are damn important for making your extenders work at their optimal levels. With a new firmware update, you can not only bring bug fixes to your device but also add security improvements to it. But, what if updating the firmware of your device itself becomes a headache for you? We have been reported by many users that their extenders are not working after updating the firmware of their devices. Well, there could be various reasons making your extender non-operational. Perhaps, you have updated the wrong firmware version on your extender or your device is not connected to the router in a proper manner. No matter what reason is letting you experience Netgear WiFi extender not working issue, we will help you fix it without any hassle. So, without giving yourself a second thought, give the below-listed troubleshooting tips a shot.

Fix: Netgear WiFi Extender Not Working After Firmware Update

Power Cycle Your Extender

To get your extender back to work, the very first thing you can do is to reboot your extender. This can be done by unplugging the extender from its power socket. After a while, plug in the extender back to its power socket and turn the power button on. Now, try accessing mywifiext setup wizard and see if it works for you.

Cross-check Cable Connectivity

Perhaps, you are facing Netgear WiFi extender not working issue due to the improper connectivity of your devices. For getting the issue fixed, verify if the cable used for connecting the router and extender is well-working. Just in case you find any cut in the wire, consider replacing it immediately.

Check Firmware Version

Updating the wrong firmware version on your Netgear extender can also make it nonworking. Thus, check if you have installed the right firmware version on your range extender. If the firmware version updated by you is accurate, then the problem might be something else. Or, just in case you have updated the wrong firmware version on your extender, you need to reset your device to the default settings and configure it again.

If you don’t know how to reset a Netgear extender, walk through the steps given below to get the job done.

How to Reset Netgear Extender to Default Settings?

A Netgear extender can be taken back to its factory settings using two different methods. One is with the use of the Reset button and another is by accessing the mywifiext.net web address. As the Netgear WiFi extender not working for you after firmware update, the latter one is not feasible for you to try. Hence, we are going to list steps for Netgear extender reset via hard reset method.

1. Make sure your extender is plugged into a wall outlet and the power LED on your device is glowing green.
2. Now, locate the Reset button on your device and press it.
3. You can use a pin-like device to press the Reset button.
4. Your extender will reboot once you complete the extender reset process.
5. Done with restoring your extender to the default settings? Now, configure it again by accessing mywifiext web address.

It’s time to check if your extender is now working fine for you or not. If you have got success with the process of fixing the Netgear WiFi extender not working issue, we must congratulate you on your hard efforts. Just in case all your efforts gone in vein and you still can’t access the settings of your Netgear extender, reach out to our technical experts for having quick assistance and getting the extender not working issue fixed.